22
SAFETY
Safety Blocker
The Safety Blocker is designed to prevent a severe damage of camera equipment.
!
The mounted equipment of the Tower can slip down, if the V-Belts of the
gearbox is loose.
The mounted equipment of the Tower can rattle down if the toothed belt is
loose.
The mounted equipment of the Tower can fall down in the very unlikely
event of a fracture of the toothed belt.
The safety Blocker prevents a slipping, rattling or falling down of the
equipment and protects the equipment hitting the ground.
Locate the sledge of Tower (by using handsets`
rocker) in a position, which gives enough safety
space between mounted equipment (Remote
Head, Camera etc.) to the ground.
Set a “limit down” on that position using the
handsets` control buttons.
Mount Safety Blocker right underneath sledge
and screw tight.
Please make sure
that the bumper is on
the upper side.
