3
Assembling instructions:
Remove the 2 Allan keys, that can be found inside the
hinges in the centre of the folded up Husky.
1. 2. 3.
Position the steering shaft and
tighten the blue lever.
The Husky can now be
flipped open.
Replace the 2 Allan keys
into their original position
inside the hinges.
Move the 2 rear wheels to
the outer position on the axle
and secure with the split
pins.
The steering shaft can be adjusted to the required position:
1. Lift the blue knob and turn by 90 to release the steering
unit.
2. Open the blue lever , tilt the shaft into the desired
position and tighten the lever again.
3. Adjust the length/height of the shaft : loosen the screw,
place shaft into the required position and tighten the
screw.
All required parts like track wheels, Bazooka etc will be fitted either on top or underneath the
dolly base, by using the Allan keys.
Summary of Contents for Husky Dolly
Page 1: ...1 I n s t r u c t i o n M a n u a l Husky Dolly ...
Page 8: ...8 ...
