Pantech Verse, Quick Start Manual

Page: 4 / 42

4
BASICS
5
First Steps
Installing your Battery
1. Insert your finger tip into the slot (1), then push down on top of the
battery cover and slide it off to remove (2).
2. Slide the battery into the slot (3) by aligning the contacts and press
down (4) until you hear the “click”.
Correct Incorrect
Caution :Do not expose to high temperature
(140 /60 ). Do not disassemble .
Do not allow metal objects to contact or short
circuit the battery terminals. Do not incinerate or expose to fire. T o dispose of properl y
(Ex:Recycling number 1-800-822-8837)
Attention: Ne pas exposer a des tempe atures
élevées (140 /60 ). Ne pas démonter . Ne pas
laisser des objets métaliques venir en contact avec les bornes de pile ni les court-circuiter .
Ne pas incinérer ni faire brûler .
Pour mettre au rebut adéquatement (Ex:numéro de recyclage 1-800-822-8837)
Cuidado: No exponga a alta temperatura (140
/60 ). No desensamble. No permita que objetos de metal entren en contacto o hagan
cortocircuito con los terminales de la batería.
No incinere ni exponga al fuego. Para eliminar en forma adecuada (Por ejemplo:Número de
reciclaje 1-800-822-8837)
Atte nti Att ention
: Ne pas e
xposer a
des temp ea
tures
14
0 /60 ). N
e pas dé monter
. Ne pas
venir en con
ta ct
3. Align the cover tabs with the slots on the back of the device (1) and
slide the battery cover onto the unit until it snaps into place (2).
Note: If the battery is not correctly placed in the compartment, the handset will
not turn on and/or the battery may detach during use.
Incorrect Correct
Removing your Battery
1. To remove the battery cover, insert your finger tip into the slot (1),
then push down on top of the battery cover and slide it off (2).
2. Insert your fingernail into the slot and lift the battery (3), and pull
the battery (4).