Pantech PG-1310V, User Manual

Page: 28 / 77

28
Example: To display the letter “C”, quickly press the [ ] key three times.
To display the letter “K”, press the [ ] key twice. This method is called
Multi-tap typing.
Note : The cursor moves to the right when you press a different key. When
entering the same letter twice or a different letter on the same key, just
press the Right key or wait a few seconds for the cursor to move to the
right automatically, and then enter the next letter.
Refer to the table for more information about the characters available. The
characters vary depending on the text input language.
Changing the Case
To change the case of the next letter(s) that you type, press the [ ] key.
There are three cases:
-
Lower case (no indicator)
-
Initial capital ( )
-
Capital lock ( )
[English]
KEY Characters in the displaying order
. , - ? ! ' @: 1
a b c 2
d e f 3
g h i 4
j k l 5
m n o 6
p q r s 7
t u v 8
w x y z 9
Space
Using the Number Mode
The Numeric mode enables you to enter numbers in the text. Press the
key corresponding to the digit you want to enter.
Using the Symbol Mode
The Symbol mode enables you to enter symbols in your text.
To display more symbols, press the [ ] key.
To input a symbol, press the number for the symbol, and the text will
appear in the input screen.
Press the [
] key longer or
[ ]
Soft key to escape from the Symbol
mode.
If you entered the symbol mode with the hot key ([
] long key), press the
key again to return to the previous mode.
Or, press the
[ ]
key to proceed to the
mode next to the Symbol mode.