33
7.3 Using the T9 Mode
In the T9 alphabet Editor, the word is composed completely as you input
the text.
①
Press the keys numbered [
2
] to [
9
] to input texts. For example, press
[
4
][
3
][
5
][
5
][
6
] in sequence to input ‘hello’.
The word you are typing appears on the display. It may change with
each key you press.
②
Enter the whole word before editing or deleting any keystrokes.
③
Upon searching a word, input the next text.
④
If you fail to search a word, press the [
] key to search which text
can be typed in. If several texts are searched, the text in the most
frequently used will be listed first.
⑤
Continue entering the next word.
7.4 Using the Multi-tap Mode
When typing in the Multi-tap mode, press the key labelled with the target
letter:
- Press the key once for the first letter.
- Press twice for the second letter.
- And so on
Example: To display the letter “C”, quickly press the [
2
]
key three times.
To display the letter “K”, press the [
5
] key twice. This method is called
by Multi-tap typing.
Note
: The cursor moves to the right when you press a different key.
When entering the same letter twice or a different letter on the same key,
just press the Right key or wait a few seconds for the cursor to move to
the right automatically, and then enter the next letter.
Refer to the table for more information about the characters available.
The characters vary, depending on the text input language.
