PANTARHEI Hydro Wizard ECM 75, Operating Manual, Page: 36 / 48

Operating manual
Hydro Wizard
®
ECM 75
36 37
Rhei CAN-Bus in the power-saving mode to the po-
wer consumption, for. lower in emergency / battery
operation.
Warnings
Warnings are displayed on the info screen during
operation. To signal the screen fl ashes when there is
a warning. (The screen may also fl ash when the Hy-
dro Wizard
®
is connected to a PC via the PantaLogic.)
„ Warning: Blockage “: The impeller does not turn,
prude whether it is blocked.
„
Impeller Error
“: The impeller turns too fast, check
if the blades are in tact and they are running in the
water.
„ Warning: Overload “: The power consumption is
peek too high. Check if the impeller is blocked.
„
Overpower Stop “: The power consumption has
increased too high. So that the Hydro Wizard
®
was
stopped to prevent damage. Check if the impeller is
blocked.