PANTARHEI Hydro Wizard ECM 75, Operating Manual, Page: 25 / 48

Operating manual
Hydro Wizard
®
ECM 75
24 25
Wave mode
The wave mode is used to generate waves in the
aquarium. After changing into the wave mode you can
change the parameters in the settings menu or the
quick change menu from the info screen. If the pump
is stopped ( STOP button in the info or menu screen is
blinking) your settings will take eff ect when the pump
is restarted after you push the STOP button again.
Otherwise they will take eff ect immediately.
The Hydro Wizard
®
generates waves by changing
between two flow intensities. The flow intensities A
and B can be varied between 0% and 100%.
The Parameters „Time A“ and „Time B“ are used to
select the duration of each action.
Figure 11: information screen in wave mode
The parameter „Time A-B“ defi nes the duration of the in-
terval when the fl ow changes from „Flow A“ to „Flow B“.
The parameter „Phase delay“ is used when several
powerboxes and pumps are working in sync. It defi -
nes the delay in which the powerboxes wave is star-
ted later than the MASTER powerbox.
More information on connection several powerboxes can be found
under the chapter: „Connecting to the Panta Rhei CAN-Bus“.
To fi nd the ideal frequency in your aquarium select
FIND FREQUENCY in the settings menu. Now select
the maximum fl ow strength. The wave frequency will
Flow B Flow A Time B-A
Time B
Time A Time A-B Phase
Current
flow
i