Panoz Esperante GTS
Panoz Esperante GTS
Panoz Esperante GTS
RVP – Reliability / Value / Performance
Seat Installation
Because of differences in driver’s size these instruc-
tions should be used as a general guideline only.
A:
Place seat tray inside of car.
B:
Place a 2”x6” board inside the tray.
C:
Set seat on top of 2”x6”
D:
Sit in seat and using 1” and/or 2” boards to
achieve a comfortable height and angle.
E:
Once comfortable with seat location mark the seat
so it’s angle can be recreated outside the car.
F:
Remove seat, boards and seat tray and recreate
angle and height according to your markings.
G:
Clamp seat to seat tray and using a 3/8” drill bit,
drill bolt holes.
H:
Install bolts from outside of seat to inside of seat.
(Use spacers/washers as required)
I:
Place seat back in the car. Now is a good time to
route your lap belts through the seat.
J:
Confirm seat location and fasten seat tray from the
bottom up.
K:
Don’t forget to attach the fifth point of your harness.
Page 11
