PanoSpace I, User Manual

Page: 16 / 36

14
the “Unload filament” button.
2. The extruder heats up the filament and soon pulls the filament out of the print
head.
3. If the filament doesn’t come back from the top of the extruder, click the
“Retract” button.
4. Take out the filament and click the “Finish” button.
Note: When not in use, please insert the filament end into the hole on the edge of the filament roll, to prevent
tangling.
2.5 Adjust Level of Print Bed
Note: With our special printing algorithm, this operation is not necessary for most cases, unless the print bed or
the extruder has changed.
1. Click the “Adjust” button on the main menu on the touch screen, then click
the “Adjust level” button.
2. The print bed will move up and position itself to point A.
3. Click arrow buttons to adjust the gap between the print bed and the print
head. Fold a piece of print paper twice (about 0.4 mm thick), and insert into the
gap. Find out a proper gap that the paper right not able to move any longer.