EN
A.3. Mounting the Antenna
Mounting the antenna internally
To mount the antenna internally use the supplied desk stand and follow the instructions
at B. DESK MOUNTING INSTRUCTIONS
Mounting the antenna externally
Mounting the antenna outside will provide optimum signal strength and data rates.
Begin by following the instructions at A.1 & A.2 concerning position and orientating
the antenna. Then follow C. MAST MOUNTING INSTRUCTIONS or D. WALL MOUNTING
INSTRUCTIONS depending upon the equipment you have available.
IMPORTANT SAFETY INFORMATION
SELECTING A POSITION
A.
RF Safety Note
– Ensure that the antenna is mounted in such a way that no person is likely to be
within a distance of 30cms (12”) from the antenna during use. Ensure that the antenna is used only
as supplied the co-axial cables should not be cut shorter or otherwise modified.
General Safety Note -
Make sure that the product is mounted so that it cannot fall and cause
injury. Do not chew the product or put it in your mouth. Do not leave children unsupervised with the
product or packaging.
Waste electrical products should not be disposed of with household waste. All electronic products
with the WEEE logo must be collected and sent to approved operators for safe disposal or recy-
cling. Please recycle where facilities exist. Many electrical/electronic equipment retailers facilitate
“Distributor Take-Back scheme”for household WEEE. Check with your Local Authority or electronic
retailers for designated collection facilities where WEEE can be disposed of for free.
RoHS 2
compliance is declared per Directive 2011/65/EU and its subsequent amendments with
exemption 6.c applied. This product contains lead as an alloying element in a copper alloy contain-
ing up to 4% lead by weight.
REACH
(Registration, Evaluation, Authorisation and Restriction of Chemicals, EC 1907/2006)
This product contains Lead (CAS No. 7439-92-1) which is classified as an SVHC (Substance of Very
High Concern) as being toxic to reproduction under Article 57c. of REACH.
Do not chew parts
or put them in mouth, keep away from unsupervised children. Dispose of parts as WEEE
waste do not send to landfill.
Electrical Caution -
Parts of this antenna are an electrical conductor. Contact with power lines
can result in death or serious injury. The antenna and supporting mast must not be close to any
power lines during installation, use or removal. If the antenna is elevated and at risk from lightning
strike it must be ensured that the antenna is mounted and earthed appropriately by a trained
professional in accordance with the relevant standards.