EN
C.1
C.2
1 -
To Mast Mount this antenna you will need:
1 x Antenna
1 x U-Bolt
1 x U-Bolt Plate
2 x Washers
2 x Spring Washers
2 x Nuts
2 -
Mast Mounting the antenna externally
Ensure that the selected mounting location can be safely accessed with the equipment
that you have available and mount the antenna so that it has at least 1 metre (3.3’) of
clearance from all obstructions if possible. The antenna should not be mounted directly
on to metal masts or poles. If the antenna must be mounted to such a surface it must
be mounted at the lip of the roof or the very top of the pole such that the body of the
antenna is elevated clear of the metal surface.
3 -
Ensure a safe connection
Secure the antenna in place and waterproof the exposed connections. Fully tighten
the mounting hardware. If exposed the RF connector joint should be waterproofed with
a weatherproof electrical tape (self amalgamating type is recommended) allowing a
significant overlap of each turn and ensuring that the overlap is in the opposite direction
to predicted water fall.
C.3
MAST MOUNTING INSTRUCTIONS
C.
