PANNOMED VET LIFT 7H9.6P1, Instruction Manual

Page: 10 / 27

Instruction Manual VET LIFT
Page 10 of 27
Version 2.02
A suitable power cord including a power plug is included in the scope of delivery. To avoid
injuries and other malfunctions, only connect the power cord to a power circuit when the
table is actually in operation.
Charging the table (battery-powered version)
In case you have chosen a battery-powered version of the present product, a sophisticated
battery system has already been pre-installed within your table. This provides power to all
electrical consumers that are built into the table, particularly the electric actuators.
Thereby, the battery is located on the front side of the tables chassis near the bottom and
can be easily disconnected from the table by pressing the tab on the black edge of the
battery.
Reinserting the battery is done by sliding the battery into the housing until an audible click
is heard and the battery is thus securely locked in place and connected to the product.
In order to achieve a long battery lifespan, it is recommended to fully charge the battery
after operation every day (for example, overnight). This is the most effective way of avoiding
a deep discharge of up to 100% over the course of the application period. Otherwise, the
battery lifespan would be considerably shortened, as a higher depth of discharge of the
battery results in extended wear and tear of the battery.
Disconnect
(Press)