SCANNDY USER GUIDE
Page 13
BLUETOOTH CONNECTION
To pair the Bluetooth enabled devices to a Bluetooth enabled host
1.
Connect the device to the host using the USB port and use the Universal
Configurator to set the data output mode to Bluetooth.
Select the Bluetooth profile supported by the host or required by the
application.
• Serial Port Profile (SPP) - The scanner connects to the host via Bluetooth
and emulates a serial connection. The scanner accepts an incoming
connection requested by a Bluetooth host.
• Bluetooth Keyboard Emulation (HID) -
The scanner connects to the host via Bluetooth and emulates a keyboard. The
scanner accepts an incoming connection, requested by a Bluetooth host.
(See the smartSCANNDY user guide to see how to define beeps and vibrate
signals by using the Universal Configurator.)
2.
Save the settings and disconnect the device from the computer.
On the host computer, launch the third party Bluetooth pairing application and
place the application into discover Bluetooth device mode.
3.
Select the powerl from the discovered device list. The Bluetooth
application may prompt you to scan a passkey it generated, or for you to
create one and then scan the pin
code.
4.
If the Bluetooth application prompts you to generate a pin, enter the
configured Bluetooth pin
DEFAULT: 1234
5.
If the Bluetooth application prompts you to enter the pass key it generated,
scan
numeric barcodes on page X
and confirm by scanning ENTER
6.
The right LED (2) lights constant blue as long as the device is connected
