SCANNDY USER GUIDE
Page 10
SCANING BARCODE (1D/2D Imager)
1.
Aim the scanner on the barcode
2.
Press the Trigger button (3)
3.
The device decodes the code nearest to the cross centre unless you
disable the Pick-List mode (see below) in the 2D cameras.
1. Replace the Config.INI
Please download the following file
(Right click and "save as"):
Config.INI
Please copy it to the device and replace the existing .After restart of
the device the Pick List Mode is now turned off.
2. Manually change the config file:
a. Connect the device to your computer
b. Open drive "SCANNDY"
c. Open "Config.INI" on the drive
d. Set Pick list Mode=0
e. Save the changes
f. Disconnect device from USB and reboot
