Panlab 76-0770, Hardware User Manual, Page: 27 / 31

Rotarod
26
11. TROUBLESHOOTING
This table provides instruction to solve the most frequent problems.
PROBLEM SOLUTION
The display shows the message
“Place all levers down”

Check that all levers are down.

If all levers are down check that there is not
any lever pusher blocked. If so clean it
according to our recommended cleaning
instructions (Section 10.2).

Contact technical service if problem still
persists.
The rod does not turn.

Check that the rod is properly positioned
with
the groove coupled to the
transmission.

Contact with technical service if problem
still persists.
In Acceleration mode when
pressing the “Hold Ramp” button
the display shows the message
“Raise levers to activate lanes”

Lift one or more levers and press “Hold
Ramp” button again.

Check that levers are correctly placed.

Check that any lever pusher is blocked. If
so clean according to our recommended
cleaning instructions (Section 10.2).

Contact with technical service if problem
still persists.