BA_PH_245-10_EN_13-22.docx
57
20.3
Milling Fences
Article
Description
Art. No.
MILLING FENCE 216
Instead of standard milling fence type 215. Made of die-cast alumin-
ium with plane-milled cast iron fence plates with aluminium splinter
tabs, length 500 mm; to accommodate optional safety rulers and
mouldboard. Total adjustment via digital handwheel, adjustment of
the partial fence plate via star grip and scale (+5 ... -25 mm), max. tool
diameter 250 mm.
4274
HYDRAULIC
SWIVEL-AWAY DEVICE
For comfortable and safe lifting and swivelling of the milling fence
type 215 / 216 into a neutral position without using force.
Recommended: Additional console for power feeder Art. No. 4561
4349
1 SET SAFETY RULERS
FOR MILLING FENCES
As continuous guide between the two fence plates consisting of: 2
pieces rulers 260 x 6 mm, 3 pieces rulers 260 x 3 mm, 1 grooved board
(multiplex) 260 x 150 x 12 mm, incl. sliding blocks and Allen key.
2093
INTEGRAL FENCE SYSTEM
INFEED/OUTFEED SIDE
500 + 500 MM
(only for fence type 216)
The swivelling guide rods integrated in the fence plates ensure a guide
surface without gaps for all milling operations; the exact adjustment
to the tool diameter and height is achieved by a stepless adjustment.
Usable instead of standard cast fence plates.
4170
INTEGRAL FENCE SYSTEM
INFEED/OUTFEED SIDE
650/500 MM
(only for fence type 216)
The swivelling guide rods integrated in the fence plates ensure a guide
surface without gaps for all milling operations; the exact adjustment
to the tool diameter and height is achieved by a stepless adjustment.
Usable instead of standard cast fence plates.
4169
INTEGRAL FENCE SYSTEM
INFEED/OUTFEED SIDE
650/650 MM
(only for fence type 216)
The swivelling guide rods integrated in the fence plates ensure a guide
surface without gaps for all milling operations; the exact adjustment
to the tool diameter and height is achieved by a stepless adjustment.
Usable instead of standard cast fence plates.
4171
CENTREX
MILLING PROTECTION
AND PRESSURE DEVICE
For secure fixing of workpieces during manual milling work; the spe-
cial shape of the pressure shoes ensures precise workpiece guidance
during all milling work, attached to the milling fence, can be folded
upwards. Usable instead of the standard protection and pressure de-
vice GAMMA V 1629.
2220
