www.panel.it 4
4
Chapter 1: Preface
1.1 Safety rules
All the Panel PC PSR1 series have been designed and built taking into account all the issues associated with an
industrial environment such as that where it is necessary to ensure the operation of the system in the presence of
vibration, moisture, dust and critical heat conditions.
Only skilled staff must make any job on the device, only after having fully read and understood the safety instructions.
Before installing and using the device, note the following precautions:
-
Read all instructions carefully.
-
Do not place the unit on an unstable surface, cart, or stand.
-
Avoid using the system near water, in direct sunlight, or near a heating device.
-
To prevent electrical shock or equipment damage, unplug the power cord from the power supply prior to
installing or wiring the PC.
-
Do not disassemble or modify the Panel PC. Doing so may cause a fire or an electric shock.
All tasks such as the installation, commissioning and servicing of devices are only permitted to be carried out by
qualified personnel. Qualified personnel are those familiar with the transport, mounting, installation,
commissioning and operation of devices who also have the appropriate qualifications. National accident
prevention regulations must be observed.
1.2 Product checking
Preliminary operations to be made as soon as you receive the PANEL product:
-
Check if the pac
king hasn’t unde
rgone any damage due to transport.
-
Verify if the packing contents correspond to the delivery note.
The product model, code and serial number are shown on the identification plate which is positioned on the rear.
If serious damages or inconsistency are found between the packing contents and the delivery note, please contact the
PANEL SRL sales department immediately.
It’s advisable
to keep the original packing in order to use it for possible transports back in assistance
.
