www.panel.it 20
20
4.5 WI-FI module installation
mSATA slot Mini PCI-E slot Mounting screw WI-FI module
Installing an expansion card
1)
Before installing the expansion card, please make sure that the power supply is switched off or the power cord is
unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the
card before you start the installation.
2)
Remove the system unit cover (if your motherboard is already installed in a chassis).
3)
Remove the bracket facing the slot that you intend to use. Keep the screws for later use.
4)
Align the card connector with the slot and press firmly until the card is completely seated on the slot.
5)
Fasten the card to the chassis with screws.
6)
Connect the antenna cable to the main connector of the device:
7)
Replace the system cover
WI-FI module installation area
WI-FI module mounting
