TDP43ME
TDP43ME: PA26305A01_05
Page: 13 of 59
12-2011
IF
,
the printer does not show
previous step pop up balloon, then a
balloon will pop up
which says “Device
did not install properly”.
Click on the balloon and the window at
the left will pop up. In this case, no
TDP43ME driver was found.
Click CLOSE.
Go to the WINDOWS orb in the bottom
left corner and click. Go to DEVICES
and PRINTERS and click. The window
at the left will pop up.
If the printer appears in the “PRINTERS
and FAXES” line, then it is installed
correctly.
If it appears in the “UNSPECIFIED” line,
then there is an issue, most likely an
incorrect or a missing driver.
Right click on the printer in the
“UNSPECIFIED” line and go down to
PROPERTIES.
Click on PROPERTIES.
