INTELLIGENT GATEWAY INSTALLATION MANUAL
15
2.
Click the checkbox for Enable Device Manager. Click
Apply
to start Device Manager on the Gateway.
If Device Manager starts properly but does not yet have connectivity to the SynapSense Environment
Server, the Status LED on the Gateway will blink Red and Blue.
The light can blink RED up to 30 seconds after start. If the light continues to blink RED, check the log
then refer to the
Password Tab
Use the Password tab to change the user password. The User Name is predefined as “admin”. The default
password is “admin” and can be changed by the customer.
Should you forget the password, the remedy is to reset the device. See
System Tab
The information in the upper portion of the System tab auto-populates. In the lower
portion, the operating system log displays as well as buttons for updating the firmware,
disconnecting Device Manager communication to the gateway, and rebooting the
gateway.
OS Log
–
Displays the system log for the device. Select the
Auto refresh
checkbox to enable automatic
updates to display in the text area.
