© Panduit Corp. 2020
PLA-100, PLA-H100
Rev. 02
1 / 2021
Page
28
of
34
The Module Status indicates the general state of the PLA SYSTEM. A table of Module
Status states is below. Minor Faults may be corrected by a Reset. Major faults may be
corrected by using the Restore Factory Defaults. If normal operation does not follow after a
“Restore”, please contact Panduit for technical support or service.
Wrapper Status
Description
Disconnected
Wrapper is not connected to the dispenser
Running
Wrapper is operating correctly
Idle
Waiting
Error
Wrapper has a fault
Dispenser Status Description
Running
Dispenser is operating correctly
Error
Dispenser has a fault
