© Panduit Corp. 2020
PLA-100, PLA-H100
Rev. 02
1 / 2021
Page
30
of
34
“Change” button immediately to the right. The Device Name can be restored to the
factory default value as described in
Restore
section on Page 32.
13E: Network Settings
The Network Settings shows the current method the PLA SYSTEM uses to obtain
an IP Address on the network, the current IP Address, the Network Mask and
Gateway address values. In the default DHCP setting, the PLA SYSTEM will
connect to the network and look for a DHCP server to issue an IP Address. The IP
Addr
ess Mode can be changed to Static by clicking on the “Change” button
immediately to the right.
When the IP Address Mode is changed, an IP Address, an optional Network Subnet
Mask and optional Gateway address can also be entered. The IP Address Mode
can be restored to the factory default value as described in
Restore
section on Page
32.
