© Panduit Corp. 2013
OPERATION MANUAL
PAT1M, PAT1.5M, PDM
ENGLISH
Page: 38 of 39
Error Message
Corrective Action
Dispenser Jam - Check Tie
Loading
a.
Press “Buzzer” button, open Dispenser door, Press
“Unload” button while pulling back lightly on strip of cable
ties until all cable ties are removed. Cut off bad cable ties
and reload.
b.
If having trouble clearing jam, contact Maintenance
Department. (Note: Don’t pry on white plastic roller; will
cause damage.
Jaw Sensor Error
Contact Maintenance Department
Detent Sensor Blocked or Dirty
Blocked Hose - Failed Back
Pressure Test
12A: Cable Tie Condition Factors
INCORRECT CABLE TIE
CUT-OFF
(Long cut-off / tail)
CORRECT CABLE TIE
CUT-OFF
CABLE TIE DETACHES
FROM BUNDLE
• Cable ties are too moist
(due to high humidity)
-
Turn down tension until correct cut-
off occurs.
• Cable ties are too brittle
(due to dry conditions)
-
Take new reel of ties out of
original bag.
-
Place new ties on PDM.
-
Place used reel in bag with
damp paper towel or
sponge to recondition.
13: "TIE IN TOOL” ADDENDUM
Turning new "Tie in Tool" feature "ON" or "OFF"
Level 1 - Operator Menu ("Load, Unload, Menu" Display)
Loads: 14
XXXXXXX
Load
Unload
MENU
From either of these screens,
Press the MENU button
Level 1B - Loading commands disappear
XXXXXXX
MENU
