INSTRUCTIONS CM315E
For Technical Support: www.panduit.com/resources/install_maintain.asp
P
AN
Z
ONE
Horizontal Slack Manager
Install tray using (4) #12-24 x 1/2 screws provided at desired
RU as shown in figure 3. Refer to recommended layout
section for optimal mounting location(s).
Screw Mounting Locations
Figure 3
Bend Radius Post Installation
Bend radius posts can be installed at any rack location using (1) #12-24 x 2.5" [(1) #12-24 x 1.5” for PZBR3] screw provided as shown in
Figure 1. Post can be customized by removing tabs as show in Figure 2.
Note:
Post may be installed over active equipment mounting locations.
Figure 1
#12-24 x 2.5" Screw
Bend
Radius
Post
Score Line
Figure 2
Page 7 of 11
