INSTALLATION INSTRUCTIONS CM310
For Technical Support: www.panduit.com/resources/install_maintain.asp
1
9
2
3
4
5
6
10
Surface
Mount
Box
Note: Fire Resistant Foam used when network cable is
routed into the enclosure without the use of conduit in
flush wall mount and in-ceiling mount applications.
9.1 Place two pieces of fire resistant foam into the foam
retention bracket. Both pieces should be underneath
the network cable and the ground cable.
9.2 Place the remaining two pieces of fire resistant foam on
top of the cables.
9.3 Press down on the foam and slide the foam retention
plate into place. The expanding foam holds the
retention plate in place.
Step 9: Install Fire Resistant Foam (if needed)
Step 10: Install Patch Cord
10.1 Insert one end of the 2' long Cat5e Patch Cord into the
RJ45 port located on the WAP.
10.2 Insert the other end of the patch cord into the Cat5e
jack located in the surface mount box.
Page 7 of 8
