E-mail:
Phone:
866-405-6654
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2014
FS104
www.panduit.com
Page 2 of 2
SPLICE
CABLE #2
CABLE #1
Ribbon Fiber
CableTie
Ribbon Fiber Grommet Sleeve
4.1
Place the FST24S splice tray close to the splicing equipment. Route all fibers into the tray.
4.2
Remove enough fiber to reach splicing equipment, trim fiber and splice per manufacturer’s instructions.
4.3
Coil fibers back into the tray and place the completed splice into the splice holder. Avoid tight bends or twists in
fibers. Check fiber bend radii once all fiber is coiled in tray.
4.4
Make sure all fibers are inside retaining tabs of splice tray. Snap the clear cover on top of the splice tray and
insert into stacking unit.
4.0 SPLICING FIBERS
Figure 2
Figure 3B
PVC Tubing
Tight Buffered Cable
Cable Tie
Crimp Inner Tab First
Figure 3A
RIBBON FIBER
BUFFERED FIBER
