INTRODUCTION & SAFE OPERATION
4
Congratulations on your purchase of the
C
OUGAR
™
LS9Q Hand-Held Thermal
Transfer Printer. The versatile
C
OUGAR
™
LS9Q is designed to meet the
demanding printing requirements of electrical and network users. The LS9Q
prints high quality industrial labels on a wide variety of materials for electrical and
network applications, such as wire/cable, components, safety, and facility
identification. It is the ideal labeling tool for electricians, installers, maintenance
personnel, and contractors. As you will read throughout this operator’s manual,
the
C
OUGAR
™
LS9Q has been designed with many time saving features that will
allow you to maximize your labeling productivity.
This manual will guide you step by step through the set-up, operation, and
troubleshooting of the
C
OUGAR
™
LS9Q Hand-held Thermal Transfer Printer. If
you have problems not covered herein, contact your local Panduit Sales
Representative, call Panduit Technical Support at 866-871-4571, or call Panduit
Customer Service at 800-777-3300. More information is also available on the
web at www.panduit.com.
SAFE OPERATION PRACTICES
The following general safety practices supplement the specific warnings and
cautions depicted elsewhere in this manual. They are recommended precautions
that must be understood and applied during the operation and maintenance of this
printer.
Do Not Operate In An Explosive Environment
Do not operate the printer in the presence of flammable gases or fumes.
Operation of this printer in such an environment constitutes a definite safety
hazard.
Do Not Operate In Wet Or Damp Areas
Do not operate this printer in wet or damp areas. Operation of the printer in such
an environment constitutes a definite safety hazard.
