8
Installation Guide
AT-OME-EX-TX-WP-E
Requirements:
•
AT-OME-EX-TX-WP-E
•
Firmware file
•
Computer running Windows
•
USB-A to USB-B cable
1. Disconnect power from the AT-OME-EX-TX-WP-E, which can be done by disconnecting the
category cable from the HDBaseT port on the receiver.
2.
Remove the faceplate to expose the hidden “firmware update” button, located next to the
USB
HUB
ports, as shown. Refer to
Faceplate Removal and Assembly (page 4)
more information.
3. Connect a USB cable from the
HOST
port on the AT-OME-EX-TX-WP-E to a PC, using a
USB-A to USB-B cable.
4.
Simultaneously press and hold the firmware update button, while reconnecting the power.
The
PWR
LED indicator will be blinking green.
Updating the Firmware
PWR LED indicator
Firmware update button
IMPORTANT:
Do not disconnect power from unit during the firmware update
process. Doing so may damage the unit.