4
Installation Guide
AT-OME-EX-TX-WP-E
Faceplate Removal and Assembly
1. Unscrew both Phillips-head screws and the HDMI connector hex bolt from the front of the
faceplate, as shown:
2. Gently remove the faceplate by pulling it toward you.
Removal of the faceplate requires that the AT-OME-EX-TX-WP-E be disassembled from the
electrical box or mud ring. A small Phillips-head screwdriver is required to remove the faceplate.
OMEGA
TM
AT-OME-EX-TX-WP-EU
HDMI
HUB
LINK
PWR
HOST
NOTE:
It is not required that the AT-OME-EX-TX-WP-E be removed from the
electrical box or mud ring before removing the wallplate.