AT-UHD-SW-510W
48
Advanced Operation
This mode allows the AT-UHD-SW-510W to be integrated with a video conference system. In this mode, both static
input and output routing are specified. Auto switching will be enabled. However, the specified static input will be
removed from the auto-switching pool. For example, if the
HDMI IN 3
port is specified as a static input, then auto-
switching will “skip” this port when auto-switching. The instructions below, provide an example setup.
1. Login to the web GUI. Refer to
Introduction to the Web GUI (page 71)
for more information.
2. Click
Routing
from the menu bar on the left.
3. Click the
Matrix Switch
drop-down list and select
Matrix Mode w/static route
.
Matrix Mode w/ Static Route
4. Click the
Matrix Mode Static Output
and
Matrix Mode Static Source
drop-down lists to select the output and
source devices. Note that the values shown in the illustration below, are arbitrary. Routing is managed using API
commands and a control system.
Refer to the illustration on the next page for an example diagram.