AT-UHD-SW-510W
109
Appendix
13. During the update process, the following message will appear in the upper-right corner of the screen. Note that
the update process may take
up to five minutes to complete
. The unit automatically reboots.
14.
After the firmware process has completed, the AT-UHD-SW-510W will automatically reboot and the following
message will appear at the top of the screen:
15. Click the message or press the ESC key to return to the
Login
screen. Enter the login credentials.
16. Click
Info
on the side menu bar and check the presence of the
Firmware Version
section. It should read
V1.1.05.
Firmware Version section
17. If there is no
Firmware Version
section, then do the following:
a. Click
System
on the side menu bar.
b. Click the
Shutdown
button.
c. Wait one minute, then power-on the unit.
18.
The firmware update process is complete.