AT-OCS-900N
23
IMPORTANT:
Resetting the AT-OCS-900N will restore the unit to factory settings. All settings will be
lost!
Resetting the AT-OCS-900N
Device Operation
When the AT-OCS-900N is reset, the unit will be set to factory-default settings. Before performing a reset, it is
recommended to save the current settings to an external file. Refer to
Working with Configuration Files (page 22)
for more information.
If access to the web server is not available, the AT-OCS-900N provides a reset button on the unit.
1. Open the desired web browser and enter the IP address of the AT-OCS-900N.
2. Login using the required credentials.
3. Click
System
in the side menu bar.
4. Locate the
Sensor Actions
window group and click the
Factory Reset
button.
1. Remove the lens cap by rotating it counterclockwise.
2. Locate the square-shaped
Factory Reset
button, near the center of
the unit.
3. Press and hold the button for 5 seconds to factory-reset the unit.
4. Replace the lens cap on the unit by turning clockwise.
Using the Web Server
Using the Hardware Reset Button
Energy Mgmt Equip
Motion Sensor - Low Bay, White
Connect to LPS supply only
Input: 57V, 1.4W, Max Amb: 50° C
S/N: 210226-IDLM-XX1
MAC: 68-27-19-D2_2E-CE
AT-OCS-900N 210226-1
2