AT-OCS-900N
10
Connection Instructions
Installation
3.
In a pre-drilled 2.5” hole, fold the wing clips towards the center of the AT-OCS-900N. The recommended
mounting hold diameter is 2.5” and should not exceed a diameter of 2.90”. Refer to
Figure 1.1
for dimensions
of the AT-OCS-900N.
4. Insert the device into the ceiling tile and release clips. The wing clips will return to the down position, securing
the unit in place.
C E I L I N G
C E I L I N G
Energy Mgmt Equip
Motion Sensor - Low Bay, White
Connect to LPS supply only
Input: 57V, 1.4W, Max Amb: 50° C
S/N: 210226-IDLM-XX1
MAC: 68-27-19-D2_2E-CE
AT-OCS-900N 210226-1
C E I L I N G
1. Determine the coverage area required. Refer to
Coverage Pattern Diagrams (page 11)
for more information.
2. Connect an Ethernet cable from the
LAN
port to the Local Area Network.
Figure 1.1
IMPORTANT:
Do not touch or apply pressure to the IR sensor. Doing so may damage or break
the IR sensor.
2
3
3
4
4
