AT-HDVS-200-TX / AT-HDVS-200-TX-PSK
30
The Web GUI
System page
IP Mode
Click this toggle to set the IP mode of the AT-HDVS-200-TX. By default, the AT-HDVS-200-TX is set to
DHCP mode.
Available settings:
STATIC IP
,
DHCP
.
IP
Enter the IP address of the AT-HDVS-200-TX in this field. This field will only be available if
IP Mode
is set to
STATIC
IP
. The default IP address is
192.168.1.254
.
Netmask
Enter the subnet mask in this field. This field will only be available if
IP Mode
is set to
STATIC IP
.
Gateway
Enter the gateway (router) address in this field. This field will only be available if
IP Mode
is set to
STATIC IP
.
Telnet Port
Enter the Telnet port in this field.
Telnet Login Mode
Click this toggle to set the login mode to
ON
or
OFF
. If this feature is set to
ON
, then the AT-HDVS-200-TX will
prompt for both the username and password. Use the same credentials as the web GUI.
Telnet Timeout
Click this drop-down list to select the timeout interval, in seconds, before the Telnet connection is automatically
closed after no activity. Range: 1 to 3600 (seconds).
Broadcast
By default, broadcast mode is set to off. When set to on, changes in the web GUI will also be affected on the control
system (if connected), via TCP/IP. To separate control between web GUI and Telnet, set this feature off.
