AT-HDVS-200-TX / AT-HDVS-200-TX-PSK
15
4.
Locate the command sections (ON, OFF, , Volume-, and Mute). Each command will have a
Set
command
field.
5. Click the
Send Mode
toggle switch to
ASCII
or
HEX
, depending upon the format of the command.
6. Enter the required command for each function, in the
Set command
fields. Consult the documentation of the
display device to obtain the correct command string.
7. Click the drop-down list, to the right of each
Set command
field, to append any required carriage return or line
feed characters that may be required by the display device.
8. Enter the feedback string in the
Feedback
field and click the drop-down list, directly to the right to select any
required characters to append to the feedback string. This step is optional.
9.
Test the operation of each command by clicking the
Test
buttons for each command.
10.
Once each command string is functioning correctly through the web GUI, test each command using the buttons
on the front panel.
Basic Operation
HDMI IN 2
RS-232
RX
R
L
TX
PW
HDMI
INPUT
DISPLAY
v
v
AT-HDVS-200-TX
VOL
HDMI IN 1
VGA IN
AUDIO IN
1
2
VGA
FW
RS-232
HDMI IN 2
LAN
HDBaseT OUT
RS-232
RX
TX
