AT-HDR-CAT-2
12
Installation
IP address
Subnet mask
Gateway
•
Setting static IP mode
1. Connect to the AT-HDR-CAT-2 using RS-232 or Telnet.
2. Execute the
IPStatic
command. This command requires three arguments: the desired IP address of the
AT-HDR-CAT-2, the subnet mask, and the gateway address. All arguments must be entered in dot-decimal
notation. The following is an example:
IPStatic 192.168.1.112 255.255.255.0 192.168.1.1
IMPORTANT:
Note that when switching between DHCP and static modes, within a Telnet session,
the connection will be terminated once the
IPDHCP
command is executed.
Use the
IPStatic
and
IPDHCP
commands to switch between DHCP and IP mode through RS-232 or Telnet. Refer
to API documentation for more information. All commands and their arguments are case-sensitive.
Setting the IP Address Using Commands
The IP mode of the AT-HDR-CAT-2 can also be set using the built-in web server. In order to access the web server,
the IP address of the AT-HDR-CAT-2 must be known. Refer to
Logging in to the Web Server (page 15)
for more
information.
1.
Open the desired web browser and enter the IP address of the AT-HDR-CAT-2.
2. Log in using the required credentials.
3. Click
System
in the menu bar.
4. Click the
IP Mode
toggle to switch between the
DHCP
and
STATIC IP
setting. When set to
STATIC IP
, the
IP
,
Netmask
, and
Gateway
fields can be modified.
5. Click the
Save
button to save the changes.
Using the Web Server
