Panduit ATLONA AT-HDR-CAT-2 Manual Download Page 42

Page: 42 / 54

AT-HDR-CAT-2

EDID lock

Click this toggle to switch the EDID lock mode. When set to the

LOCK

position, the

LOCK

LED indicator on the front

panel will glow solid blue. Note that in this mode, all front-panel buttons are locked.

EDID mode

Click this drop-down list to select the desired EDID mode.

Configuration and Management Interfaces

Setting

Description

INT

Internal mode. Uses the selected internal EDID.

LEARN

Learn mode. Allows the AT-HDR-CAT-2 to read the downstream EDID. Once the EDID

is learned, it will be used by the connected source device to determine what video and

audio formats can be sent to the sink device. Refer to

EDID Management (page 18)

for more information.

INT EDID settings

Click this drop-down list to select the desired EDID.

EDID copy

Click this button to copy the selected EDID to the

HDMI IN

port.

EDID page

EDID

Description

Connected Display

Uses the downstream EDID of the connected display

ATL 4K60 MCH

3840 x 2160 (UHD) with multichannel audio support

ATL 4K60 PCM MCH

3840 x 2160 (UHD) with PCM multichannel audio support

ATL 1080P MCH

1920 x 1080p with multichannel audio support

ATL 1080P 2CH

1920 x 1080p with two-channel audio support

ATL 1080P DD

1920 x 1080p with Dolby

™

Digital audio support

ATL 1080P DVI

1920 x 1080p for DVI displays

ATL 720P DD

1280 x 720p with Dolby

™

Digital audio support

ATL 720P 2CH

1280 x 720p with two-channel audio support

EDID

Summary of Contents for ATLONA AT-HDR-CAT-2























































Search results

Summary of Contents for ATLONA AT-HDR-CAT-2

Reviews:

Related manuals for ATLONA AT-HDR-CAT-2

Brands by name

Popular brands

Panduit ATLONA AT-HDR-CAT-2, Manual

Search results

Summary of Contents for ATLONA AT-HDR-CAT-2

Reviews:

Related manuals for ATLONA AT-HDR-CAT-2

Brands by name

Popular brands