| S0000473 | January 2022 rev6
© Pandrol 2022
16
sur
38
The gas pressure reading on the manometer when stopped, will be slightly higher than the reading during
the preheating operation.
Never search for a gas leak with the help of a flame
If a gas leak is suspected, do not attempt to correct it by tightening the fitting, but dismantle the fitting in
search of a foreign particle inserted in the parting hose. In the event of such discovery, change the seal.
4.4.6
Ignition of the HFP preheater
Make sure that the nozzle of the HFP is correctly centered in the moulds.
Set the main switch to position I.
adjustment
wheel
