Pluto User Manual v1.38
Page 36 of 66
Each line starts with a combination of
i
,
3
and
o
to indicate which LUTs are
contained in the slot. If it has a 3D cube, the size of the cube is also shown. e.g.
(3, 17pt) - Indicates the slot has a 3d cube and it has 17 points per side
(i3o, 17pt) - Indicates the slot has an Input 1d, a 3d cube and an Output 1d
LUT; the 3D cube has 17 points per side.
To turn on test patterns, highlight
Te
s
t
and rotate the knob to step through the
15 available patterns. The Pattern will be applied pre-LUT/legaliser to all outputs
at the same standard as the input.
Highlight and select
Setup
item to navigate into the Setup menu.
Highlight and select
Dual Head
item to navigate into the Dual Head menu.
4.3 Setup Menu
(from Main Menu)
Highlight and select
Disable Remote
to prevent Software override of current
settings.
Pandora Technology
United Kingdom
www.pandora-int.com
October 2013
