Pluto User Manual v1.38
Page 32 of 66
These controls emulate the traditional functions of a Primary colour corrector.
Using a mouse, click and hold over either of the Lift, Gamma or Gain's Master or
Differential controls and drag to adjust the values. The R, G & B values will
update accordingly. The small Reset buttons will clear the change and return the
value to the previously loaded CDL. The first click will clear the Differential, the
second click will clear the Master.
The
Clear
button at the bottom of the panel will reset all controls to unity.
Once the set look is achieved this can then be saved as a CDL file using the
Save
button. in addition to saving, the current look can be loaded directly in to a
Pluto Slot using the
Send to Slot
button.
The current CDL can be saved and applied to
either the current slot or, using the
Slot Number
selector, it can be saved to any other inactive
slot.
Note: This process will over-write the existing
1d LUTs in that slot.
If Available, the Pluto will display RP188 Timecode in this window for both the A
and B channels.
Use the
MARK
button to log the current CDL data as a Look marked to the
current timecode. Later this can be used to build an ALE or EDL file which allows
the colour information to be used another external system. See the CDL menu
section in Chapter 3 for more information.
A scratchpad is also available, containing 10 positions in which looks can be
Pandora Technology
United Kingdom
www.pandora-int.com
October 2013
