background image

AUTONOMOUS TRACKER PANDORA EYE

USER MANUAL

14

15

SPECIFICATIONS

Parameter

Value

min

max

Tracker operation voltage

3 V 

5,5 V

Current consumption in the Sleep/

Transmission mode

<3 μA

<100 mA

Battery/Amount

AAA / 3 pcs.

GSM-modem

Telit GE866-QUAD

SIM-card type

micro-SIM

2.4 GHz transmission protocol

Bluetooth 4.2 

LowEnergy

GPS/GLONASS module

Simcom SIM33ELA

Operating temperature range 

(depends on the batteries

- 40 С°

+ 85 С°

Dimensions

52x42x17,5 mm

WARRANTY OBLIGATIONS

Manufacturer guarantees correct operation of the service-

security system if exploitation, installation, storage and 
transportation conditions described in this manual were met. 

The system should only be used according to the manual.
Parts malfunctioning during warranty period on the fault of the 

manufacturer should be repaired or replaced by the installation 
center of the manufacturer or by certified service center. 

 IT IS RECOMMENDED TO USE LITHIUM (LI-FES2) BATARIES 
ESPECIALY AT LOW TEMPERATURES. ALKALINE BATARIES 
ARE ALSO ALLOWED; DO NOT USE REGULAR ZINC-CARBON 
BATTERIES.

«File manager» - you can upload the firmware from the phone’s 

memory. (the firmware is available on pandorainfo.com).

«Internet» - you can upload the firmware from the internet 

server.

REPLACING OR RECHARGING THE BATTARIES

When replacing or recharging the batteries, it is necessary to 

carefully perform the following sequence of actions:

1. Open the cover of the device by bending two side latches.
2. Extract discharged batteries.
3. Replace or recharge the batteries.
4. Insert the batteries keeping in mind the correct polarity.
5. Close the cover keeping the location of the side opening for 

the built-in microphone.

Summary of Contents for EYE












Reviews: