background image

AUTONOMOUS TRACKER PANDORA EYE

USER MANUAL

10

11

The account can be used to log in the Internet-service  

pandora-on.com or mobile application without restrictions on the 
number of users.

Add the tracker to your account:

The Internet service and mobile applications support 

simultaneous work with several telemetric devices. To add the 
tracker, log in the Internet service 

pandora-on.com

 and follow 

the instruction to add the device. 

Enter the data from the owner’s card. Forced call to 

the «Registration» window is possible through settings 
(ADMINISTRATIVE SETTINGS – REGISTER NEW DEVICE).

STEP 2. Preparing the device for operation

Carefully assemble the device. Keep in mind the correct polarity 

of the batteries and the location of the side opening for the built-
in microphone when closing the back cover.

The tracker is in the «Transportation» mode at the moment of 

the shipment. All built-in interfaces are switched off in this mode.  

They will be switched on after entering the settings mode and 
setting the owner’s phone number.

STEP  3. Setting the owner’s phone number 

 There are three ways to set the owner’s phone number:
1. Activate the tracker by pressing and holding the 

VALET

 button 

for 3 seconds (3 short flashes of the

 LED

). Release the button after 

the third flash. The tracker will enter the settings mode. After that, 
it will be available for a call within two minutes. Make a call from 
the owner’s number to the phone number of the device at the 
given time. 

The system will automatically remember the number of the 

incoming call as the owner’s number and will end the call.

2. Log in to 

pandora-on.com

 with the previously registered 

account. Go to the 

«SETTINGS»

 - 

«NOTIFICATIONS»

 menu,

Enter the owner’s phone number in the 

«Owner’s number»

 

in the following format 

+xxхххххххххх

. Save the settings after 

entering the number. Activate the tracker by pressing and holding 
the 

VALET

 button for 3 seconds (3 short flashes of the 

LED

). 

Release the button after the third flash. The tracker will receive the 
settings from the Internet-service within 10 minutes.

3. This setting is available after a mobile phone is recorded in 

the tracker memory (see PANDORA NAV BT MOBILE APPLICATION 

WARNING! IF YOU HAVEN’T RECEIVED THE CONFIRMATION 
E-MAIL, CHECK THE SPAM FOLDER OR PERFORM «FORGOT 
PASSWORD» PROCEDURE ON THE MAIN PAGE OF 
PANDORA-ON.COM

Summary of Contents for EYE












Reviews: