Pandora EYE, User Manual

Page: 3 / 11

AUTONOMOUS TRACKER PANDORA EYE USER MANUAL 4 5
VALET BUTTON AND LED INDICATOR
VALET
is a multifunctional button located on the device. The
button is used to activate the tracker and to change the settings
of the device.
LED
is an information red light indicator. It displays the device
state by duration and frequency of the flashes, displays the VALET
button hold time.
Fastenings are side fastenings for fixing the tracker on a hard
surface using metal clips (included in the set).
Microphone is a built in electroacoustic device required for
«Listening» function.
TRACKER MODES
The Pandora Eye has the following operation modes:
1.
«Transportation» mode. This mode will have been active
since the moment of manufacture of the device. The device is
in sleep state in this mode (all built-in GSM/GPS/BLUETOOTH
interfaces are switched off ). Short-term exit from this mode is
available when configuring the tracker using the VALET button.
The tracker will exit this mode and enter the main «Autonomous
beacon» mode after configuring «Owner’s phone number».
3.
Emergency «Tracking» mode.
The owner forcibly turns
on this mode by the Internet-service or mobile application.
If the device is in sleep state, the function will be activated at
the moment of «waking up»). This mode is the most energy
consuming, it allows device to be constantly on-line within
specified period (from 20 minutes to 6 hours – the setting can
be changed via the Internet-service or mobile application). In
this mode, the tracker determines the current coordinates with a
certain periodicity and sends them to the server to form the track
of the object. This mode also provides access to the «Listening»
function.
2. Main «Autonomous beacon» mode. This mode will be
automatically activated after configuring «Owner’s phone
number». The device is in sleep mode the most of the time in this
«VALET» button
Fastenings
Microphone
LED indicator