45
44
USER MANUAL
PANDORA DXL 1090L SERVICE-SECURITY SYSTEM
R E M O T E C O N T R O L • I M M O B I L I Z E R
14 45
06 30
будильник
включен
будильник
выключен
будильник
14 45
06 30
alarm clock
enabled
alarm clock
disabled
alarm clock
14 45
06 30
alarm clock
enabled
alarm clock
disabled
alarm clock
hours
minutes
ALARM CLOCK SETTINGS
To set up the alarm clock, select
«ALARM CLOCK»
menu. Enable alarm with short
press of
button or disable it with short press of
button.
Setting of alarm clock is similar to clock setting.
REPLACING A BATTERY IN THE REMOTE CONTROL
If high quality batteries are used, service-security system remote can function up to 4
months without needing a replacement. Battery needs to be replaced if the remote
control is not turning on or the icon
has only one bar left and starts flashing.
To replace the battery:
• move battery cover lock in the direction shown with
arrow;
• take the battery out and place a new one on its place;
• the remote is ready for use (switch it on by pressing and
holding button for 3 seconds)
It is recommended to keep an extra AAA battery
ARMING/DISARMING USING A RADIO TAG
To arm/disarm the system, RF tag should be in radio
coverage area. The system produces a protected
(AES-128 encryption) interactive high-speed exchange
of authorization codes in the frequency range 2,4 GHz
on one of 125 channels. To arm the system when the
ignition is switched off, shortly press the tag button.
The system will confirm the command receiving with 1
short sound signal and 1 flash of turn indicators.
To disarm the system, shortly press the tag button.
The system will confirm the command receiving
R E M O T E C O N T R O L
14 45
06 30
будильник
включен
будильник
выключен
будильник
hours
minutes
TIME SETTINGS
To set up time, select
«TIME»
menu. With short presses of
button set hours,
with short presses of
set minutes.
This mode does not require to save
To exit menu, press and hold button for 1 second.
WARNING! The system time will be automatically synchronized with the
mobile device time after pairing the system with the mobile device.
LED
indicator
Controlling
button