Pando PHM-950, User Manual

Page: 135 / 180

INOXPAN S.L. EN - 29
WARNING! Any type of repair must only be done by a specialised technician. Any repair done
by a person not authorised by the manufacturer is dangerous.
You do not need to contact Technical Assistance to resolve the following questions:

The display is not showing! Check if:
- The time indication has been switched off (see section on Basic Settings).

Nothing happens when I press the keys! Check if:
- The Safety Block is active (see section on Basic Settings).

The oven does not work! Check if:
- The plug is correctly fitted in the socket.
- The oven’s power is switched on.
- The door is completely closed. The door should close with an audible click.
- There are any foreign bodies between the door and the cavity front.

When the oven is operating I can hear some strange noises! Check if:
- There is an electrical arcing inside the oven caused by foreign metallic objects (see section on
type of ovenware).
- The ovenware is touching the oven walls.
- There are any loose items of cutlery or cooking tools inside the oven.
 The food doesn’t heat up or heats very slowly! Check if:
- You have inadvertently used metal ovenware.
- You have selected the correct operating times and power level.
- The food you have put inside the oven is a larger amount or colder than you usually put in.

The food is too hot, dried out or burnt!
Check if you selected the correct operating time and power level.

I hear some noises after the cooking process is finished!
This is not a problem. The cooling fan keeps on working for some time. When the temperature
has dropped sufficiently, the fan will switch itself off.

The oven switches on but the interior light does not go on!
If all the functions work properly it is probable that the lamp has blown. You can keep on using
the oven.
 The display shows “cErr”!
Disconnect the plug and wait approximately 5 seconds. After that, you can plug in the
Microwave again, the “cErr” message disappears and the appliance is fully operational.
13.1. SUBSTITUTION OF LIGHT BULB
If the light bulb needs substitution call the Technical Assistance since it is necessary to uninstall the
oven to replace it.
13. TROUBLESHOOTING