37
Frequently Asked Questions
Q: There are strange lines on the scanned image, or the
image is not clear.
A:
Check the following:
Are there scratches on the original, or is the original
clean? Remove any stains or dust from the original before
scanning.
Did you insert your original into the plastic sheath before
scanning?
Has the Photo Converter been used for a long period of
time without cleaning and calibration? Follow the
instructions for "Cleaning the Photo Converter" on page
32 and “Calibrating the Photo Converter" on page 34, and
then try again.
Q: The scanned filmstrip image is not rotating properly
A:
The current “auxiliary” OCR capability has difficulty
distinguishing the direction of some numbers, (i.e.,“6”, “9”). If
the number’s position is near the edge of the film, it can easily
be worn out or damaged, and then it can’t be detected in the
expected position, or meet the required conditions causing the
Auto Mirror/Flip function to be disabled
(see page 19).
Please
follow the indicator on the film adapter to re-scan the filmstrip.
Q: The original is stuck halfway in the feeding slot.
A:
Press the Power button; the Photo Converter will eject photos
out the front, and films will be ejected out the back.
Q: The status indicator blinks rapidly, no scan is possible, or
the converter powers off automatically.
A:
Check the following:
Is the memory card inserted properly into the memory
card slot? Re-insert the card and try again.
Is the SD card locked (set to write-protect)? Unlock the
card.
Is the memory card full? The indicator blinks when the
free space on the memory card is below 1MB. Use
another card if necessary.
Summary of Contents for PANSCN05
Page 1: ...User Guide PANSCN05 ...