20
This Photo Converter Feed Filmstrips
1. Make sure that the feeding slot is clear of any original.
2. Slide the paper guide lever all the way to the
right side of the feeding slot.
3. Align the negative & slide adapter with the
grooves and then gently insert it all the way into
the feeding slot, being careful not to bend the
metal parts.
When installed properly, the negative & slide adapter should firmly
snap into place, and the Photo Converter will begin a calibration.
Wait until indicator lights are in the “Ready to use” status before
proceeding.
Notes
:
If user somehow improperly move the film adapter. This may
impact LED adjustment from the calibration. Avoid changing film
adapter position during film scanning. If necessary, remove and
re-insert the film adapter properly to re-calibrate LED light guide.
4. Hold
up
the
negative towards light, with the
image facing you in normal orientation (not
mirror or upside down).
Insert the filmstrip into the negative & slide
adapter.
Pay attention to the direction
of the filmstrip when inserting.
Summary of Contents for PANSCN05
Page 1: ...User Guide PANSCN05 ...