57
6.7
Adjusting the backrest distance
The distance to the backrest can be adjusted in one easy step, and
allows about 15 mm of travel behind the plate that supports the
back.
Changing the positioning is very simple:
•
Using an allen wrench (hex key) for M5 bolts and an 8mm
pipe wrench for M5 nuts, remove the bolts and their nuts.
5
•
Move the plate to the desired position, aligning the
holes in the plate that holds the back with those found on
the seat.
•
Using an allen wrench (hex key) for M5 bolts and an 8mm pipe
wrench for M5 nuts, replace the nuts and bolts and tighten. (see
pic. 60)
Fig. 60
Summary of Contents for Evo
