53
6.5
Adjusting seat height
You can adjust the front and rear seat height by varying the angle
of the seat.
•
Using an allen wrench for M6 bolts (hex key) and M6
nut with a pipe wrench, remove the bolts with nuts and
washers.
•
Move the seat to the desired height by aligning the
holes in the front tube frame with those found on the
fins.
•
Insert the bolts with nuts and washers and tighten
•
Repeat the same procedure for the rear.
In the same way it is also possible to move the seat closer to the
rear wheel axles, adjusting the Center of gravity (CoG).
Moving the location of the seat closer to the CoG makes the Chair
easier to tilt and more “reactive” for more active users. Moving the
location of the seat further away from the CoG makes the chairs
less easy to tilt and suitable for users who need more sta- bility
and security. (see pic. 57.58).
6
Summary of Contents for Evo
