34
DEMOQE128 User Manual
in the special characters #$0D and #$0A which are CR (carriage return) and
LF (line feed). The accepted commands are:
nnnn,nnnn,nnnn,nnnn
The nnnn values are 0000-FFFF and correspond in order to the data
displayed on both the graph and bar graphs as follows: X/A, Y/B, Z/C, W/D.
nnnn:nnnn:nnnn:nnnn
The nnnn values are 0000-FFFF and correspond in order to the data
displayed the graphing component as follows: X, Y, Z, W.
nnnn=nnnn=nnnn=nnnn
The nnnn values are 0000-FFFF and correspond in order to the data
displayed on the bar graph component as follows: A, B, C, D.
7
DEMONSTRATION MICROCONTROLLER APPLICATIONS
The following microcontroller applications are designed to run on the QE128
processors.
7.1
Quick Start Application
The function of the Quick Start microcontroller application is to play a different
tone and illuminate a different LED for each of the buttons which may be
pressed on the DEMOQE128 board. The potentiometer controls the intensity
of two LEDs on the DEMOQE128 board, via PWM signals. This application
comes pre-programmed into the memory of the QE128 processor.
Usage of this application can be seen in the
Section 3.1 - Quick Start Guide
of the manual.
